iCandy Peach Car Seat Adaptors: Upper vs Lower Fitting

Quick answer

For a single pushchair, use the main car seat adaptors in the upper position. For a double setup with a second seat or carrycot below, use the lower car seat adaptors on the lower frame. Always match the adaptor set to your Peach model (5, 6 or 7) and check the car seat is securely clicked in before moving.

How to fit iCandy Peach car seat adaptors step by step

1. Identify your Peach model and position: Check the model name on your pushchair frame (Peach 5, 6 or 7). Decide whether the car seat will go in the main upper position or the lower position for a double setup. If you are unsure which position is suitable for your combination, consult your pushchair manual before fitting.
2. Choose the correct adaptor set: Use main car seat adaptors for the upper position and lower car seat adaptors for the lower position. Do not mix the two sets or force an adaptor onto the wrong part of the frame. Check the adaptor label or packaging to confirm you have the right set for the position.
3. Attach the adaptors to the frame: Align each adaptor with the corresponding socket on the pushchair chassis and push down until it clicks or locks into place. Repeat on both sides. Give each adaptor a gentle tug to confirm it is secure before moving on.
4. Fit the car seat: Lower the infant car seat onto the adaptors, making sure the connection points line up. Press down firmly until you hear or feel it engage. Lift the car seat slightly to check it is locked on; it should not come away without pressing the release.
5. Check the setup for stability: With the car seat in place, check that it sits level and does not wobble excessively. For a double setup, confirm the lower car seat does not interfere with the seat or carrycot above. If anything feels loose or misaligned, remove the car seat and recheck the adaptor fitting.
6. Remove the car seat and adaptors when not in use: Press the release button on the car seat to lift it off. To remove the adaptors, press any release tabs and pull them upwards from the frame. Store the adaptors clean and dry to keep the locking mechanisms working smoothly.

Product facts

• iCandy Peach 5, 6 & 7 Lower Car Seat Adaptors: Lower car seat adaptors for Peach 5, 6 and 7 allow an infant car seat to be clipped onto the lower pushchair chassis. This is the set you need when the main position is taken by another seat or carrycot in a double setup.

  

• iCandy Peach 5, 6 & 7 Main Car Seat Adaptors: Main car seat adaptors are only to be used in the main position on the Peach 5, 6 and 7. Using them on the lower frame is not supported, so choose the correct set for your configuration.